26-27 PRODUCTS

FREESTYLE CATEGOLY LINE UP CARVING CATEGOLY LINE UP

MICRO

MINI

micro

mini

made in JAPAN｜OG

DSPRD (micro, mini)

¥99,000（Tax Excluded） ¥108,900（Tax Included）

A kids' model featuring full fiberglass construction. This basic Hammer model uses wood and fiberglass construction, offering forgiving flex with snappy rebound.

Built on GRAY Hammerhead series technology, this board combines wood core and fiberglass construction to deliver forgiving flex with snappy rebound. This is a freecarving machine for kids that offers dynamic and pleasant turning performance.

FUNCTION

＊ABS top sheet with excellent shock absorption
＊Base : ISO 7500 Graphite Sintered, die-cut part: Hi Pex 4M Sintered
＊1.8mm width, stainless steel edge

ARCHES GEOMETRY & SPEC

SINGLE CAMBER

Camber-tech for purely focusing on free-ride.Board center has a tight arc while both ends are with slight arc.This makes more repulsive force when snow-contact-points come closer to the board center with pliancy of the board.

ALL MOUNTAIN 8

SPEED 8

PARK RIDING 7

STREET STYLE 8

GROUND TRICK 9

FLEX RATE 4

MODEL
Overall Length
Effective Edge L.
Contact Length
Waist Width
Sidecut Radius
Sidecut Offset
Nose Length
Nose Width
Nose Height
Tail Length
Tail Width
Tail Height
Camber
Rocker
Stance Width
Insert Quantity
Stance Setback
Edge
Sidewall Angle
Sidewall Color
Running Base
Stiffness

micro
1320
1130
1010
214
6500/6200/6800
-20
165
264
34.4
145
256
25.9
6
---
380-500
12+12
20
1.8mm/stainless
25°
NEON RED
IS7500 Graphite

mini
1380
1190
1070
220
7200/6800/7600
-20
165
270
34.4
145
262
25.9
7
---
400-520
12+12
20
1.8mm/stainless
25°
NEON RED
IS7500 Graphite

CONSTRUCTION

■ Full fiberglass sandwich construction
■ 0.5 mm ABS Top Sheet
■ Stainless steel edges

REINFORCEMENT / FIBERGLASS & METAL

FIBERGLASS上

FIBERGLASS下

CORE CONSTRUCTION

STD CORE II

Soft maple is used for center and both edges sections while Walnut is a base.

□ Japanese Cypress	Light but stiﬀ
□ Poplar	Reasonably stiﬀ and light with consistency
□ Japanese Beech	Stiﬀ and strong with high density
□ Paulowania wood	very light with weak structure against pressure
□ Walnut	very light but not so strong
□ Soft maple	light with low density
□ Bamboo	The fibers run vertically, making it flexible and springy.
□ Aspen	Lighter and more uniform than beech.

SHAPE

Directional Shape

Directional shape has clear traveling direction. Slightly long nose can be responsive to any snow conditions. Tail length is relatively shorter so as not to sacrifice switch riding.

FLEX

Directional Flex

Stiffer flex is given tail-end side. Set-back stance can be supported by stiff tail.

SIDE CUT

TripleRadius Sidecut

3 of arcs combination is used for side cut. In Gray’s production, a small radius arc is set underfoot and 2 larger radius arcs are given both nose and tail ends.It shows quick response at beginning of turning or jib trick, and provides stable edge grip during high speed riding. Release of edge at end of turning or takeoff from kicker can be done smoothly.

CORE PROFILE

Negative

Core between both feet is significantly thinner. It gives strong torsion effect and the snowboard bows around center of the board. As the result, rider can feel quick response.Rider also can make angulation edging angles differently at front foot and at back foot.The subtle riding technique is very effective for technical riding.