26-27 PRODUCTS
IIIN
III
IIIW
IV
IVW
VW
VEW
VI
VIEW
VII
VIIEW
IIIn
III
IIIw
IV
IVw
Vw
Vew
VI
VIew
VII
VIIew
made in JAPAN｜OG
DSPRD Ti type-R
¥180,000（Tax Excluded） ¥198,000（Tax Included）
A high-end hammerhead model offering outstanding edge rotation and turning performance ― allowing riders to control their turn radius freely and precisely.
The DSPRD Type-R embodies exceptional carving ability through its unique hammerhead theory–based tapered shape, vario camber, and multi-radius sidecut design. Multiple curves are also applied to the nose up-arc, ensuring smooth snow contact and control during edge transitions. A 0.4mm titanium sheet, trimmed in an X-shape and positioned beneath the topsheet, provides balanced torsional stiffness ― firm yet not overly rigid. Designed for high-speed carving, the Type-R represents the ultimate evolution of the premium hammerhead concept.
FUNCTION
＊New EX(Extra-wide) model added to V,VI,VII
＊IIIn (Narrow) model introduced in III for women and riders with smaller feet
＊Wide-waist options available for III and IV
＊PE topsheet + X-shaped 0.4t Titanal plate
＊48 Rockwell high-hardness steel edges
＊New Vario Camber and triple sidecut radius for an unprecedented level of riding
＊IIIn (Narrow) model introduced in III for women and riders with smaller feet
＊Wide-waist options available for III and IV
＊PE topsheet + X-shaped 0.4t Titanal plate
＊48 Rockwell high-hardness steel edges
＊New Vario Camber and triple sidecut radius for an unprecedented level of riding
ARCHES GEOMETRY & SPEC
VARIO CAMBER
Evolutional arc which enables variable effective edge-length by pressure intensity and edging angulation.Snow-contact-points are set closer to board center and gives better handle-ability in low speed riding. The effective edge-length becoming longer in high speed riding gives stability and high gripping in high speed turning.
ALL MOUNTAIN
10
SPEED
10
PARK RIDING
10
STREET STYLE
8
GROUND TRICK
5
FLEX RATE
8
| MODEL |
|---|
| Overall Length |
| Effective Edge L. |
| Contact Length |
| Waist Width |
| Sidecut Radius |
| Sidecut Offset |
| Nose Length |
| Nose Width |
| Nose Height |
| Tail Length |
| Tail Width |
| Tail Height |
| Camber |
| Rocker |
| Stance Width |
| Insert Quantity |
| Stance Setback |
| Edge |
| Sidewall Angle |
| Sidewall Color |
| Running Base |
| Stiffness |
CONSTRUCTION
DSPRD Ti type-R Construction
■ 0.4 mm titanal in an X-shape inserted beneath the Top Sheet
■ Sintered Top Sheet
■ Steel edges with a hardness rating of 48
■ Sintered Top Sheet
■ Steel edges with a hardness rating of 48
REINFORCEMENT / FIBERGLASS & METAL
FIBERGLASS上
FIBERGLASS下
CORE CONSTRUCTION
STD CORE II
Soft maple is used for center and both edges sections while Walnut is a base.
SHAPE
Directional Shape
Directional shape has clear traveling direction. Slightly long nose can be responsive to any snow conditions. Tail length is relatively shorter so as not to sacrifice switch riding.
FLEX
Directional Flex
Stiffer flex is given tail-end side. Set-back stance can be supported by stiff tail.
SIDE CUT
TripleRadius Sidecut
3 of arcs combination is used for side cut. In Gray’s production, a small radius arc is set underfoot and 2 larger radius arcs are given both nose and tail ends.It shows quick response at beginning of turning or jib trick, and provides stable edge grip during high speed riding. Release of edge at end of turning or takeoff from kicker can be done smoothly.
CORE PROFILE
Negative
Core between both feet is significantly thinner. It gives strong torsion effect and the snowboard bows around center of the board. As the result, rider can feel quick response.Rider also can make angulation edging angles differently at front foot and at back foot.The subtle riding technique is very effective for technical riding.