26-27 PRODUCTS
38
41
44
48
51
54
57
38
41
44
48
51
54
57
made in JAPAN｜OG
EPIC
¥115,000（Tax Excluded） ¥126,500（Tax Included）
A premium full twin model featuring an active camber profile.
With mid-flex construction, this versatile model excels across disciplines, from jibbing to slopestyle.
With mid-flex construction, this versatile model excels across disciplines, from jibbing to slopestyle.
The active camber combines an advanced hybrid design with a gentle reverse-radius camber near the nose and tail contact points. This reduced edge contact delivers an intuitive snow feel and enhanced maneuverability. The synergy between active camber and multi-sidecut design (aggressive radius between feet) creates an optimal balance of control and powerful edge grip underfoot.
FUNCTION
＊Active camber profile
＊Ultralight core with a mesh fiberglass plate
＊1.8mm high carbon stainless steel edges
＊IS7500 sintered base
＊Printed base design
＊Ultralight core with a mesh fiberglass plate
＊1.8mm high carbon stainless steel edges
＊IS7500 sintered base
＊Printed base design
ARCHES GEOMETRY & SPEC
ACTIVE CAMBER
Compared to ordinal Camber, the camber angle to snow-contact-points are slightly flat.This makes snow-contact-points come closer to board center more when weighted, and provides better rotational performance with less pressure at both ends. This is a next generation arc which gives fancy footwork while reasonable camber feeling is reserved underfoot.
ALL MOUNTAIN
7
SPEED
6
PARK RIDING
10
STREET STYLE
9
GROUND TRICK
8
FLEX RATE
6
| MODEL |
|---|
| Overall Length |
| Effective Edge L. |
| Contact Length |
| Waist Width |
| Sidecut Radius |
| Sidecut Offset |
| Nose Length |
| Nose Width |
| Nose Height |
| Tail Length |
| Tail Width |
| Tail Height |
| Camber |
| Rocker |
| Stance Width |
| Insert Quantity |
| Stance Setback |
| Edge |
| Sidewall Angle |
| Sidewall Color |
| Running Base |
| Stiffness |
CONSTRUCTION
Ultra Light Core
All of 2026-2027 models of GRAY SNOWBOARDS has the construction of Sandwiched wood core.
Our original designs select appropriate woods to combine for wood core and give optimal flexibility and lightness for each model.
As the reinforcing materials, not only fiber glass but all new materials “IZANAS®” is used together with Titanal metal and carbon fiber. The combination gives flexibleness and more stiffness in good balance.
Our original designs select appropriate woods to combine for wood core and give optimal flexibility and lightness for each model.
As the reinforcing materials, not only fiber glass but all new materials “IZANAS®” is used together with Titanal metal and carbon fiber. The combination gives flexibleness and more stiffness in good balance.
REINFORCEMENT / FIBERGLASS & METAL
FIBERGLASS上
FIBERGLASS下
CORE CONSTRUCTION
Super Light Core
Light Maple is used for insert holes section and edge section while main body is made of Walnut. The core is designed for Epic. Combination of the core construction and fiberglass plate realizes high repulsive force even light weight.
SHAPE
Twin Shape
Same shape and same length are given to both nose and tail. No difference is aware between traveling direction and switch riding.
FLEX
Twin Flex
Symmetric flex pattern. Center stance is a basic.
SIDE CUT
TripleRadius Sidecut
3 of arcs combination is used for side cut. In Gray’s production, a small radius arc is set underfoot and 2 larger radius arcs are given both nose and tail ends.It shows quick response at beginning of turning or jib trick, and provides stable edge grip during high speed riding. Release of edge at end of turning or takeoff from kicker can be done smoothly.
CORE PROFILE
Negative
Core between both feet is significantly thinner. It gives strong torsion effect and the snowboard bows around center of the board. As the result, rider can feel quick response.Rider also can make angulation edging angles differently at front foot and at back foot.The subtle riding technique is very effective for technical riding.