26-27 PRODUCTS
40
44
49
52
40
44
49
52
made in JAPAN｜AG
GENIUS[HV]
¥115,000（Tax Excluded） ¥126,500（Tax Included）
The "GENIUS [HV]" features a hybrid camber profile optimized for ground trick performance.
This hybrid full twin is developed for ground tricks, combining the GENIUS outline's "long effective edge and short tip" with a gentle rocker outside the feet and camber between stances. With a slightly softer flex than the camber version, it's a high-performance board suited for ground tricks from beginner to advanced level.
FUNCTION
＊HYBRID CAMBER profile for ground tricks
＊ULTRA-LIGHT CORE Construction
＊Full twin shape with twin flex
＊1.8mm high carbon stainless steel edges
＊Progressive 5-radius sidecut design
＊High-transparency IS 7700 UHMW base
＊Printed base Design
＊ULTRA-LIGHT CORE Construction
＊Full twin shape with twin flex
＊1.8mm high carbon stainless steel edges
＊Progressive 5-radius sidecut design
＊High-transparency IS 7700 UHMW base
＊Printed base Design
ARCHES GEOMETRY & SPEC
HYBRID CAMBER
The outside of the board under each foot has a gentle rocker shape, while the space between the feet has a camber, creating a “hybrid arch.” The rocker section allows for loose board handling, making it extremely easy to handle in jibbing sections and freestyle tricks. At the same time, the camber between the stances allows for sharp carving with firm edging when the board is angled. It truly combines the best of rocker and camber.
ALL MOUNTAIN
5
SPEED
5
PARK RIDING
8
STREET STYLE
8
GROUND TRICK
10
FLEX RATE
5
| MODEL |
|---|
| Overall Length |
| Effective Edge L. |
| Contact Length |
| Waist Width |
| Sidecut Radius |
| Sidecut Offset |
| Nose Length |
| Nose Width |
| Nose Height |
| Tail Length |
| Tail Width |
| Tail Height |
| Camber |
| Rocker |
| Stance Width |
| Insert Quantity |
| Stance Setback |
| Edge |
| Sidewall Angle |
| Sidewall Color |
| Running Base |
| Stiffness |
CONSTRUCTION
Ultra Light Core
All of 2026-2027 models of GRAY SNOWBOARDS has the construction of Sandwiched wood core.
Our original designs select appropriate woods to combine for wood core and give optimal flexibility and lightness for each model.
As the reinforcing materials, not only fiber glass but all new materials “IZANAS®” is used together with Titanal metal and carbon fiber. The combination gives flexibleness and more stiffness in good balance.
Our original designs select appropriate woods to combine for wood core and give optimal flexibility and lightness for each model.
As the reinforcing materials, not only fiber glass but all new materials “IZANAS®” is used together with Titanal metal and carbon fiber. The combination gives flexibleness and more stiffness in good balance.
REINFORCEMENT / FIBERGLASS & METAL
FIBERGLASS上
FIBERGLASS下
CORE CONSTRUCTION
Ultra Light Core
Japanese Cypress is widely used along with both side edges while main body is made of Paulowania wood. This core construction is effective to realize light weight but has disadvantage in strength. The disadvantage is covered by fiber glass layers. Combination of siding Pauowania wood and fiber glass gives sufficient repulsiveness and tenaciousness to the snowboard even in the lightest weight.
SHAPE
Twin Shape
Same shape and same length are given to both nose and tail. No difference is aware between traveling direction and switch riding.
FLEX
Twin Flex
Symmetric flex pattern. Center stance is a basic.
SIDE CUT
MultiRadius Sidecut
Multi-radius side cut consists of 5 arcs.The smallest arc is at the center of snowboard and large arcs aare on each side, the largest arcs are at board end. It is special side cut.
CORE PROFILE
Negative
Core between both feet is significantly thinner. It gives strong torsion effect and the snowboard bows around center of the board. As the result, rider can feel quick response.Rider also can make angulation edging angles differently at front foot and at back foot.The subtle riding technique is very effective for technical riding.