26-27 PRODUCTS

FREESTYLE CATEGOLY LINE UP CARVING CATEGOLY LINE UP

55W

55w

made in JAPAN｜OG

SONICALMACH 46, 51, 54, 55w

¥142,000（Tax Excluded） ¥156,200（Tax Included）

The Sonical Mach series achieves quick response with dynamic flex through carbon placement beneath the core.

The 46, 51, 54, and 55w models are engineered for carving & ground tricks at low to mid speeds. These premium models establish a new riding style that emphasizes ground tricks while delivering quality carving performance. Starting with excellent maneuverability at low speeds, they maintain enhanced stability for mid-speed trick execution.

FUNCTION

＊Directional shape with progressive triple sidecut design
＊X-shaped carbon configuration for quick response
＊ABS topsheet for enhanced stability on variable terrain
＊12+12 inserts for a wide range of stance width adjustability
＊1.8mm stainless steel edges

ARCHES GEOMETRY & SPEC

SINGLE CAMBER

Camber-tech for purely focusing on free-ride.Board center has a tight arc while both ends are with slight arc.This makes more repulsive force when snow-contact-points come closer to the board center with pliancy of the board.

ALL MOUNTAIN 7

SPEED 8

PARK RIDING 9

STREET STYLE 9

GROUND TRICK 5

FLEX RATE 4

MODEL
Overall Length
Effective Edge L.
Contact Length
Waist Width
Sidecut Radius
Sidecut Offset
Nose Length
Nose Width
Nose Height
Tail Length
Tail Width
Tail Height
Camber
Rocker
Stance Width
Insert Quantity
Stance Setback
Edge
Sidewall Angle
Sidewall Color
Running Base
Stiffness

46
1460
1140
1090
240
7600/7200/7800
-15
190
283
45.4
180
278
40.8
6
---
440-560
12+12
5
1.8mm/stainless
25°
NEON RED
IS7500 Graphite

51
1510
1190
1140
248
8400/8000/8600
-15
190
290
43.2
180
285
38.9
6
---
480-600
12+12
5
1.8mm/stainless
25°
NEON RED
IS7500 Graphite

54
1540
1220
1180
250
8700/8300/9000
-15
185
293
41
175
288
36.8
6
---
480-600
12+12
5
1.8mm/stainless
25°
NEON RED
IS7500 Graphite

55w
1550
1220
1180
260
8700/8300/9000
-15
190
303
43.2
180
298
38.9
6
---
480-600
12+12
5
1.8mm/stainless
25°
NEON RED
IS7500 Graphite

CONSTRUCTION

■ X-shaped carbon roving placed beneath the core
■ ABS Top Sheet
■ Stainless steel edges

REINFORCEMENT / FIBERGLASS & METAL

FIBERGLASS上

FIBERGLASS下

CORE CONSTRUCTION

STD CORE II

Soft maple is used for center and both edges sections while Walnut is a base.

□ Japanese Cypress	Light but stiﬀ
□ Poplar	Reasonably stiﬀ and light with consistency
□ Japanese Beech	Stiﬀ and strong with high density
□ Paulowania wood	very light with weak structure against pressure
□ Walnut	very light but not so strong
□ Soft maple	light with low density
□ Bamboo	The fibers run vertically, making it flexible and springy.
□ Aspen	Lighter and more uniform than beech.

SHAPE

Directional Shape

Directional shape has clear traveling direction. Slightly long nose can be responsive to any snow conditions. Tail length is relatively shorter so as not to sacrifice switch riding.

FLEX

Directional Flex

Stiffer flex is given tail-end side. Set-back stance can be supported by stiff tail.

SIDE CUT

TripleRadius Sidecut

3 of arcs combination is used for side cut. In Gray’s production, a small radius arc is set underfoot and 2 larger radius arcs are given both nose and tail ends.It shows quick response at beginning of turning or jib trick, and provides stable edge grip during high speed riding. Release of edge at end of turning or takeoff from kicker can be done smoothly.

CORE PROFILE

Negative

Core between both feet is significantly thinner. It gives strong torsion effect and the snowboard bows around center of the board. As the result, rider can feel quick response.Rider also can make angulation edging angles differently at front foot and at back foot.The subtle riding technique is very effective for technical riding.